Aluminum Plastic Pill Blister Packing Machine , Pharmaceutical
The machine Cutting Frequency:45cutting/min. 648000pills/each
working shift(10pills/per board:8 hrs/each
working shift, high productivity, low energy consumption, saves
fund and decreases the packing cost)
Beautiful appearance overall, all are built and covered with
stainless steal, fully sealed and conformed to the
standards of GMP pharmaceutical production. The product is reliable
in quality, smooth in operation. The
shapes formation can be selected according to different production
1. Travel scope can be adjusted.
2. Mould is located by locating groove, so that it`s easy to change
mould. Adopt cool-forming moulds.
3. Speed is shifted by step-less transducer. Adopt the interface of
human-machine and PLC programmable controller.
4. Waster-eliminating equipment.
5. The heating moulds will automatically separate when the machine
stops, which contributes to protect the
material between them and extend the machine`s life.
6. Adopt the equipment of trace pressing, batch number printing and
7. Stepping motor drive wheel to grip and tow wrapper, Synchronize
Max. Forming Area and Depth
Adjustable Scope of Travel(mm)
380V 50Hz 9.5kw
380V 50Hz 8kw
380V 50Hz 5.5kw
Recycle water or
circulating water consumption
Overall Dimension(L*W*H)(including foundation)
Dimension of Each Part
|1: PVC feeder||2: PVC transporting roller|
|3: Heating box||4: Forming mechanism|
|5: Medicine feeder|
(The manual feeding without this station)
|7: PTP transporting roller|
|8: Heat-sealing mechanism||9: Trace-pressing mechanism|
|10: PTP feeding mechanism & scrap-collector||11: Tow mechanism|
|12: Blanking mechanism||13: Finished product output|